1. The beam emitted by the laser is tapered, so the slit is also tapered. In this case, the stainless steel (stainless steel) with a thickness of 0.4 mm will be much smaller than the 3MM slit. Therefore, the shape of the laser beam depends on a factor that affects the cutting accuracy of the metal laser splitter. Under such a conical laser beam condition, the greater the thickness of the workpiece, the lower the precision, and therefore the larger the slit.
2. When the conical laser beams are concentrated together, the smaller and smaller the laser beams will be, and the precision of the laser segmentation becomes higher and higher, especially as the slits become smaller and smaller. At this time the smallest spot can reach 0.01mm. This is also one of the factors that influence the segmentation accuracy of the laser splitter.
3. Under such a situation, the segmentation accuracy of different material qualities is slightly different. Even with the same material, the accuracy of the cut will vary if the material is different. Therefore, the workpiece material also has a certain influence on the laser cutting accuracy.
4. The accuracy of the workbench can cause a high-precision laser splitting effect if the workbench is not accurate or otherwise.