30w Desktop Fiber Metal Mark Laser Machine adopts the imported fiber laser generator, high speed Galvo system to enable stable laser output and high qulity laser mode. This machine is not only small volume, quick speed, but easily marks on big objects surface.
1. Specification:
Model | EO-DP30 |
Laser power | 30W |
Laser Wavelength | 1065±10nm |
Q-frequency | 20KHz~100KHz |
Divergence | 0.3mard |
Marking range | 70*70mm/110*110mm/175*175mm/200*200mm |
Minimum line width | 0.01mm |
Minimum character | 0.1mm |
Marking speed | 8000mm/s |
Marking depth | 0 ~1mm |
Engraving line speed | ≤8000mm/s |
Repeatability accuracy | ±0.001mm |
Beam quality | M2:1.2~1.8 |
Marking Format | Graphics, text, bar codes, two-dimensional code, automatically |
marking the date, batch number, serial number, frequency,etc. | |
Graphic format supported | bmp,jpg,gif,tga,png,tif,ai,dxf,dst,plt,etc. |
working voltage | 220V±10%/50Hz/4A |
Unit power | <0.5kw |
Working environment | Clean and dust free or dust less |
Workingcondition:Humidity | 5%-75%,free of condensed water |
Laser module life | 100000~200000 hours |
Packing and Weight | 80*56*80cm, 80kg |
Warranty | 12 months |
2.Applicable industries:
the equipment is widely used in food and beverage, pharmaceutical, tobacco, leather, packaging, building materials, lighting, accessories, cosmetics, electronics and other industries, low consumption, non-toxic, no pollution.
3.Applicable materials:
Plastic, stainless steel, aluminum and other metal surface marking.