Portable 20w Fiber name Card Laser Marking Machine adopts the imported fiber laser generator, high speed Galvo system to enable stable laser output and high qulity laser mode. This model Laser Marking Equipment boasts for its fast marking speed, good marking effect and high efficiency to meet the demand of mass production. Furthermore Fiber Laser Marker also enjoys the advantages of easy operation, low running cost, long-term trouble –free working and free from maintenance. All these factors devotes to its capacity to satisfy industrial production.
Model | EO-PM-20 |
Work Area (mm) | 70x70 or 110*110 |
Laser Power | 20W |
Laser Repetition Frequency | 25KHz – 400KHz |
Wavelength | 1065±10nm |
Beam Quality M2 | <2 |
Min Line Width | 0.01mm |
Min Character | 0.15mm |
Marking Speed | ≤8000mm/s |
Marking Depth | ≤0.4mm |
Repeat Precision | ±0.002mm |
Power Supply | 220V(±10%)/50Hz/4A |
Gross Power | <500W |
Laser Module Life | 100000h |
Cooling Style | Air Cooling |
System Composition | Control System, Industrial Computer, Working Table |
Working Environment | Clean and Dust Free |
Operating Temperature | 10℃-35℃ |
Humidity | 5% to 75% (Free of Condensed Water) |
Power | AC220V, 50HZ, 10Amp Stable Voltage |
Warranty | 12 Months |
Dimension (cm) | 75x42x61 |
Weight (kg) | 58 |
2. Feature:
One-unit structure with manually focusing system and user-friendly operation.
Imported isolator for protection of the fiber laser generator to increase the stability and prolong the laser life.
Laser beam quality is much better than the traditional laser marking machine. Fiber laser beam mode is TEM00; focus diameter is less than 20um; expanding angle is only 1/4 of the YAG-DP. Therefore it is esp. good at delicate marking.
High electricity-laser exchange ratio, gross electricity consumption is less than 500W, which is 1/10 of the YAG’s consumption.