Acrylic laser cutting machine with automatic origin setting function, standard industrial interface, powerful and stable performance.
The device's control system uses the most advanced DSP controllers available, and the mechanical system performance is stable.
Different power CO2 lasers can be equipped according to different needs, excellent performance and price ratio.
The three-way reflection system and the linear guide structure are adopted to make the light knife run smoothly and the engraving/cutting precision is high.
The microcomputer is used to control the operation of the laser machine, and the processing width is large, the speed is fast, the process is simple, and the operation is easy.
Acrylic laser cutting machine adopts double-headed mutual shifting electronically controlled moving structure, which can conveniently set the distance between two laser heads according to the width of the cut fabric, which greatly saves the fabric.
In the use of acrylic laser cutting machine, in order to protect the safety, in order to produce efficiently, it is essential to maintain and maintain the daily safety of the equipment.
1. Linear guide lubrication. The laser cutting machine uses a period of time to cut the smoke and dust generated by the cutting of the rail, so it is necessary to regularly maintain the rail.
2. Mirror, focus mirror wipe. After the laser cutting machine is used for a period of time, the smoke will adhere to the surface of the lens, affecting the cutting depth and affecting the cutting accuracy. Generally, three mirrors and one focusing mirror are carefully wiped off with absolute alcohol in a week or so.
3. The bearing is oiled. The laser cutting machine uses a large number of bearings. In order to ensure a good cutting effect, some bearings need to be refueled regularly. Use a clean soft cloth to wipe off the floating soil on the bearing, use a needle tube to draw the oil into the needle tube, and then slowly inject the bearing into the bearing with the needle. Slowly rotate the bearing while oiling.
4. The timing belt (belt) is elastically adjusted. There are several timing belts in the drive system of the laser cutting machine. If the timing belt is too loose, ghosting will occur. If the timing belt is too tight, the timing belt will wear. After using for a period of time, adjust the tensioning screws of the timing belt to adjust the timing belt to the tightness.
5. Laser tube maintenance. The laser tube in the acrylic laser cutting machine is cooled by circulating water. After long-term use, there will be some white scale in the tube. We can add a small amount of vinegar in the circulating water, remove the water in the tube, and then use the clean water. The water will clean the inside of the laser tube, so that the laser tube will be in the best working condition and the life will be extended.