Product Parameters
professional factory high power IPG fiber laser metal cutting machine 4000w | ||
Model | S1530 | Options |
Working area | 1500*3000mm | According to demands |
Laser output power | 3000W/4000W/6000W | |
Max moving speed | 150m/min | |
Max cutting speed | 35m/min | |
Positioning accuracy | 0.03mm | |
Repeated positioning accuracy | 0.02mm | |
Min line width | 0.1mm | |
Working platform exchanging time | 17s | |
Product Features
Automatic Lubrication System
Electrical lubrication is a kind of gear pump with rational construction, great performance and comprehensive functions.
By connection with program control system in the main machine, the lubrication system could oversee oil level within tank as well as oil transmission pressure and set lubrication periodicity, which will effectively prevent rust within lubrication system to ensure cutting accuracy
Japan NSK Bearings
These bearing housings have square flange which can be easily attached to a machine with four bolts.
With its simple mounting face, this bearing unit is widely used
Japan SMC pneumatic components
Stepless control of air pressure proportional to an electrical signal.
Serial communications specifications.
Compact/lightweight (Integrated communication parts).
France Schneider Electronic
Circuit protection against short-circuit currents,
Circuit protection against overload currents,
Breaking and industrial disconnection as per standards IEC/EN 60947-2.
Overvoltage resistance,
High performance limitation,
To fast closing independent of the speed of actuation of the toggle
Fagor Servo Motor
Wide range of rated power from 0.22 to 18.8 kW and rated speed from 2000 rev/min to 6000 rev/min.
Uniform output torque.
High torque/volume ratio. High reliability.
Low maintenance
France MOTOREDUCER
Satellite gears are double-supported on hardened and ground shafts with full-complement needle bearings increasing torsional stiffness.
Backlash ≤ 3 arcmin.
Standard operating temperature range is -15℃ to 45℃.
Protection rated IP 65 standard
Switzerland RAYTOOLS Laser Head
Rotary Knob type focus point adjustment for fine and flexible adjustment. Adjustable range: 20mm, accuracy: 0.05mm.
Drawer type mirror seat to make protect glass replacing faster and easier.
Both collimating lens and focal lens could apply compound lens for optimal optical quality and cutting result.
WIFI Wireless Control
For speedy service, we add WIFI function for our technician to operate troubleshooting and adjust parameters remotely.
Check laser source parameters to analyze failure causes.
Check cutting parameters to analyze and adjust new parameters
Product Advantages
Excellent path quality: Smaller laser dot and high work efficiency, high quality.
High cutting speed: cutting speed is 2-3 times than same power CO2 laser cutting machine.
Stable running: adopt top world import fiber lasers, stable performance, key parts can reach 100,000 hours;
High efficiency for photoelectric conversion: Compare with CO2 laser cutting machine, fiber laser cutting machine have three times photoelectric conversion efficiency.
Low cost: Save energy and protect environment. Photoelectric conversion rate is up to 25-30%. Low electric power consumption, it is only about 20%-30% of traditional CO2 laser cutting machine.
Low maintenance: fiber line transmission no need reflect lens, save maintenance cost;
Easy operations: fiber line transmission, no adjustment of optical path.
More
Our Services:
Pre-sale services: enthusiasm
We provide you with the process plan, process flow design and manufacturer equipment according to your special demand.
Sale services: servant
Send technicians to the job site for guiding the installation and adjustment of CNC Wood Laser Cutting And Engraving Machine, training operators and finishing the check and accept together with you.
After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
