Mini Laser Etching Machine For Yeti Cups with mini type, portable type, desktop type, lifting type, colorful type, standby type, full-closed type. Also provide rotary type fiber laser engraver, UV purple light metal laser engraver, 3D dynamic focus shifting working table fiber laser etcher for your choice. Widely used for metal engraving and some non-metal such as hard plastic including phone cell,animal ear tag marking,etc.
Product Parameters
Model No. | PEDB-400A | PEDB-400B | PEDB-400C |
Type | Portable | Desktop | Colorful |
PC includes or not | Not includes PC | ||
IPG Series | Pulsed, High Energy Ytterbium Fiber Lasers | ||
Mode of operation | Pulsed | ||
Polarization | random | ||
Nominal average output power | 20W - 50W | ||
Central emission wavelength | 1060-1070 nm ,Q-switched operation | ||
Emission Bandwidth (FWHM) | <10 nm | ||
Long-term average power instability | <5% | ||
Pulse width, (FWHM) | 100 ns | ||
Laser switching ON time | 180 μsec | ||
Laser switching OFF time | 180 μsec | ||
Pulse Repetition Rate* kHz | 20-80 kHz | ||
Energy per pulse (PRR = 20 kHz) | 0.95 mJ | ||
Typical beam quality, M2 | <1.8 | ||
Output fiber delivery length | 3m | ||
Operating voltage | 220V | ||
Max. Power consumption | 600W | ||
Net Dimensions | 70*20*50cm | 58*22*50cm | 70*20*50cm |
80*38*72cm | |||
Net Weight | 44 kgs | 53 kgs | 44 kgs |
Gross Weight | 60 kgs | 70 kgs | 60 kgs |
Scanning Speed | 0-7000mm/s | ||
Marking Speed | 0-5000mm/s | ||
Marking size | 110mm×110mm (F-theta 160) | ||
Spot size | ≤ 40 micron (F-theta 160) | ||
Cooling unit | Air cooled | ||
Pilot laser | 650nm diode laser, visible red light for marking guide | ||
Continuous working time | ≥16h | ||
Humidity | 45~85% (no condensation) | ||
Operating temperature | 0~40°C | ||
Control units | CT-MARK (English Version) | ||
Remark: | |||
1> PEDB-400A / B / C type, it is very compact type. Industry PC, Mouse and Monitor are not | |||
included in the quotation. Customer can use your own computer or laptop to control it. | |||
2> PEDB-400D Floor type’s quotation includes industrial PC / Mouse / Monitor. | |||
Product Features
Best Marking Effect: the laser beam of fiber laser etching machine for metal is fine and thin. Laser etching steel can provide the best marking effect among all the laser machines. Especially good at smallest character marking, such as mark on IC chip.
Deep Marking: Perfect Laser fiber laser etching machine can make deep marking up to 1.0mm on stainless steel and aluminum. While YAG and Diode marking only could mark 0.2mm-0.3mm.
Higher Accuracy: The laser etching machine for metal can reach unto 0.001mm precision, while diode only 0.01mm.
10 Years Long lifetime: fiber laser etching machine use the fiber laser source made by Germany IPG technology, the lifetime can reach 100,000 hours, so the machine can be used for 8-10 years.
No consumables:The laser etching machine for metal can be used for metal marking for 8-10 years without any consumables.
No need to adjust the laser path.
Free of Maintenance.
Use Integrated Air Cooling.
Low Power Consumption: low cost, only 0.5kw/hour.
Small and compact: the volume of Perfect Laser’s fiber laser marking machine is small, only 0.15 M3.
More
Our Services:
Pre-sale services: enthusiasm
We provide you with the process plan, process flow design and manufacturer equipment according to your special demand.
Sale services: servant
Send technicians to the job site for guiding the installation and adjustment of Mini Laser Etching Machine For Yeti Cups, training operators and finishing the check and accept together with you.
After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
